TM 5-3820-276-10-2
0218
FILLING OVERFLOW RESERVOIR
1.
Clean area around coolant overflow reservoir fill cap (Figure 3, Item 2) with cleaning cloth.
1
2
3
WWDS00708
Figure 3.
Coolant Overflow Fill Cap.
2.
Remove coolant overflow reservoir fill cap (Figure 3, Item 2) from coolant overflow reservoir
(Figure 3, Item 1).
3.
Add coolant to overflow reservoir (Figure 3, Item 1) until coolant level is at center of sight gauge
(Figure 3, Item 3).
4.
Install coolant overflow reservoir fill cap (Figure 3, Item 2) to coolant overflow reservoir (Figure 3, Item 1).
5.
Clean any spillage from around coolant overflow reservoir fill cap (Figure 3, Item 2) with cleaning cloth.
6.
Raise WWSV rear work platform and step (Volume 1, WP 0048).
7.
Close WWDR catwalks, as required (Volume 1, WP 0029).
END OF TASK
END OF WORK PACKAGE
02/13/2013root(gen.maintwp)wpno(M00004)