TM 5-3820-276-10-2
0207
MCS WHEEL AND TIRE ASSEMBLY INSTALLATION - Continued
11.
Torque eight lug nuts in order shown in (Figure 9).
1
8
5
3
4
7
6
2
WWDS00953
Figure 9.
MCS Lug Nut Torque Pattern.
12.
Remove torque wrench (Figure 8, Item 4) from torque multiplier (Figure 8, Item 6).
13.
Adjust torque wrench (Figure 8, Item 4) to 34 - 40 lb-ft (47 - 54 Nm).
14.
Install torque wrench (Figure 8, Item 4) to torque multiplier (Figure 8, Item 6).
15.
Torque eight lug nuts in order shown in (Figure 9).
16.
Remove torque wrench (Figure 8, Item 4) from torque multiplier (Figure 8, Item 6).
17.
Adjust torque wrench (Figure 8, Item 4) to 64 - 70 lb-ft (87 - 95 Nm).
18.
Install torque wrench (Figure 8, Item 4) to torque multiplier (Figure 8, Item 6).
19.
Torque eight lug nuts in order shown in (Figure 9).
20.
Use jacking handle (Figure 10, Item 3), slowly rotate release valve (Figure 10, Item 5) counterclockwise to
lower MCS until jack (Figure 10, Item 4) is clear of spring mounting plate of axle (Figure 10, Item 2) and
wheel and tire assembly (Figure 10, Item 6) is completely on ground.
02/13/2013root(maintwp)wpno(M00010)