TM 5-3820-276-10-2
0207
MCS WHEEL AND TIRE ASSEMBLY INSTALLATION - Continued
WARNING
Do not allow personnel under equipment when equipment is in raised position. Failure to
comply may result in injury or death to personnel. Seek medical attention in the event of an
injury.
4.
Use jacking handle (Figure 7, Item 1), slowly rotate release valve (Figure 7, Item 2) counterclockwise to
lower MCS until wheel and tire assembly (Figure 7, Item 3) is touching ground.
1
3
2
WWDS00924
Figure 7.
MCS Lowering.
NOTE
Socket shown on lug nut.
5.
Install 27-mm socket (Figure 8, Item 1) and extension (Figure 8, Item 2) on lug nut (Figure 8, Item 3).