TM 5-3820-276-10-2
0207
SETUP OF PAC
WARNING
Park equipment in safe area, out of traffic, where there is no danger to personnel changing
tire assembly. Park equipment on hard level ground. Failure to comply may result in injury
or death to personnel. Seek medical attention in the event of an injury.
NOTE
Make sure PAC is parked on a level surface before performing wheel and tire assembly
replacement.
1.
Set up highway warning reflector set, as required.
2.
Position wheel chocks to tires on opposite side of PAC of tire assembly that will be replaced (Volume 1,
WP 0015).
3.
Shut down PAC (Volume 1, WP 0059), if required.
END OF TASK
0207-13
02/13/2013root(maintwp)wpno(M00010)
