TM 5-3820-276-10-2
0207
PAC WHEEL AND TIRE ASSEMBLY REMOVAL - Continued
WARNING
Make sure jack is in stable area and perpendicular to vehicle. If vehicle is in sand or mire, a
platform must be placed under jack to ensure stable condition. Failure to comply may result
in injury or death to personnel. Seek medical attention in the event of an injury.
CAUTION
Jack placement is critical to avoid damaging vehicle suspension components. Follow jack
placement notes and procedures carefully. Failure to comply may result in damage to
equipment.
6.
Place 8-ton hydraulic jack (Figure 15, Item 4) with handle (Figure 15, Item 3) under spring mounting plate of
axle (Figure 15, Item 2) of tire being changed.
1
2
3
4
6
5
WWDS00323
Figure 15. PAC Jacking Setup.
7.
Raise 8-ton hydraulic jack screw (Figure 15, Item 1) until it contacts spring mounting plate of axle (Figure
14, Item 2).
8.
Rotate release valve (Figure 15, Item 5) clockwise and use jacking handle (Figure 15, Item 3) to raise PAC
with 8-ton hydraulic jack (Figure 15, Item 4) until wheel and tire assembly (Figure 15, Item 6) can be
removed.
02/13/2013root(maintwp)wpno(M00010)