TM 5-3820-276-10-2
0207
PAC WHEEL AND TIRE ASSEMBLY INSTALLATION - Continued
WARNING
Make sure jack is in stable area and perpendicular to vehicle. If vehicle is in sand or mire, a
platform must be placed under jack to ensure stable condition. Failure to comply may result
in injury or death to personnel. Seek medical attention in the event of an injury.
4.
Use jacking handle (Figure 18, Item 1), slowly rotate release valve (Figure 18, Item 2) counterclockwise to
lower PAC until wheel and tire assembly (Figure 18, Item 3) is touching ground.
1
3
2
WWDS00929
Figure 18. PAC Lowering.
02/13/2013root(maintwp)wpno(M00010)
