TM 5-3820-276-10-2
0206
WWDR FRONT WHEEL AND TIRE ASSEMBLY REPLACEMENT - Continued
1.
Set up highway warning reflector set, as required.
2.
Start WWDR (Volume 1, WP 0012).
3.
Depress clutch pedal (Figure 14, Item 4).
1
2
4
3
WWDS00603
Figure 14. WWDR Cab Setup.
NOTE
Air pressure must be above 100 psi (689 kPa) before changing mode of operation.
4.
Set RIG MODE/ROAD MODE switch (Figure 14, Item 1) to RIG MODE position.
5.
Set high-lo range control handle (Figure 14, Item 3) to up (high) position.
6.
Set gearshift lever (Figure 14, Item 2) to 9th gear.
7.
Release clutch pedal (Figure 14, Item 4).
8.
Remove ladder (Volume 1, WP 0017) from left rear work platform, if required.
9.
Lower left rear work platform (Volume 1, WP 0017), if required.
10.
Remove drilling console panel cover (Figure 15, Item 1) from drilling console (Figure 15, Item 2).
02/13/2013root(maintwp)wpno(M00009)
