TM 5-3820-276-10-2
0206
WWDR REAR WHEEL AND TIRE ASSEMBLY REPLACEMENT - Continued
35.
Remove adapter (Figure 10, Item 2) from torque wrench (Figure 10, Item 3).
36.
Return torque wrench (Figure 10, Item 3) to lowest setting.
37.
Remove extension bar (Figure 10, Item 5) from torque multiplier (Figure 10, Item 4).
38.
Remove torque multiplier (Figure 10, Item 4) form lug nut (not shown).
39.
Remove extension (Figure 10, Item 6) and 33-mm socket (Figure 10, Item 1) from torque multiplier
(Figure 10, Item 4).
40.
Remove 33-mm socket (Figure 10, Item 1) from extension (Figure 10, Item 6).
41.
If a left rear wheel and tire assembly (Figure 11, Item 4) was replaced, set JACK LR switch
(Figure 11, Item 2) to down position and raise left rear downrigger (Figure 11, Item 3).
1
2
4
3
WWDS00605
Figure 11. WWDR Raising Downriggers.
42.
Set CONSOLE POWER switch (Figure 11, Item 1) to OFF position.
43.
Install drilling console panel cover (Figure 12, Item 1) to drilling console (Figure 12, Item 2).
02/13/2013root(maintwp)wpno(M00009)