TM 5-3820-276-10-2
0203
Table 1.
PMCS - Grouter - Before Drilling Equipment Operation - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
1
WWDS00514
Figure 12. Radiator Fins.
WARNING
13
Before
Engine Coolant
Do not remove filler cap from a HOT engine
radiator. Sudden release of hot engine
coolant and steam can cause serious burns
and a loss of coolant. Make sure engine is
cool and engine cooling system is fully
depressurized before removing radiator filler
cap. Failure to comply may result in injury or
death to personnel. Seek medical attention
in the event of an injury.
CAUTION
If appropriate mixture of antifreeze is not
used during freezing temperatures, failure
to drain engine may cause costly engine
damage. Never use water only, as corrosion
inhibitors are required in engine coolant
fluid. Failure to comply may result in
damage to equipment.
Check engine coolant level in radiator (Figure 13, Item
Engine coolant level low.
1). Add engine coolant as required (WP 0222).
