TM 5-3820-276-10-2
0201
Table 6.
PMCS - PAC - After Drilling Equipment Operation - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
1
WWDS00019
Figure 41. Engine Oil Level.
WARNING
6
After
Engine Coolant
Exhaust components can become very hot
during equipment operation. Allow parts to
cool and do not touch these parts with bare
hands or allow body to contact exhaust
components. Failure to comply may result in
injury or death to personnel. Seek medical
attention in the event of an injury.
CAUTION
If appropriate mixture of antifreeze is not
used during freezing temperatures, failure
to drain engine may cause costly engine
damage. Never use water only, as corrosion
inhibitors are required in engine coolant
fluid. Failure to comply may result in
damage to equipment.
NOTE
This machine will not allow engine
starting if engine coolant is low.
Check coolant to make sure
coolant level is at minimum level
when unit is cold.
02/13/2013root(pmcswp)wpno(I30001)
