TM 5-3820-276-10-1
0034
TRUCK MOUNTED CRANE POST OPERATION PROCEDURE - Continued
result in injury or death to personnel. Seek medical attention in the event of an
injury.
Never operate the crane with less than three wraps of cable on the winch drum to
prevent excessive load on the cable anchor clamp and to avoid a potential safety
hazard. Failure to comply may result in injury or death to personnel. Seek medical
attention in the event of an injury.
1.
Gently pull variable speed trigger (Figure 7, Item 4) while holding desired toggle switch to operate crane.
3
2
1
4
5
6
WWDS00149
Figure 7.
Truck Mounted Crane Radio Remote Control Post Operation.
2.
Push extension in/out toggle switch (Figure 7, Item 6) to down position to fully retract extension.
3.
Push winch up/down toggle switch (Figure 8, Item 5) to up position to raise snatch block (Figure 8, Item 2) to
within a few feet of boom (Figure 8, Item 1) tip.
02/13/2013root(opusualwp)wpno(O20005)
