TM 5-3820-276-10-1
0033
ENGAGE P.T.O - Continued.
CAUTION
Before engaging P.T.O., ensure 60 to 130 psi (414 to 896 kPa) air pressure is established
in air tanks. Failure to comply may result in damage to equipment.
3.
Depress clutch pedal (Figure 1, Item 7).
4.
Push button (Figure 1, Item 1) and move P.T.O. lever (Figure 1, Item 2) to IN position.
5.
Check P.T.O. ENGAGED light (Figure 1, Item 3). Light illuminates when P.T.O. is engaged.
6.
Slowly release clutch pedal (Figure 1, Item 7).
END OF TASK
WWSV BUMPER WINCH OPERATION
WARNING
Never operate winch with less than five wraps of cable on winch drum. Failure to
comply may result in injury or death to personnel. Seek medical attention in the
event of an injury.
Always wear gloves when handling winch cables. Pinch hazards exits during
operation. Failure to comply may result in injury or death to personnel. Seek
medical attention in the event of an injury.
1.
Move joystick (Figure 2, Item 5) forward to pay out sufficient cable (Figure 2, Item 1) to disconnect cable
hook (Figure 2, Item 2) from vehicle tiedown (Figure 2, Item 3).
0033-2
02/13/2013root(opusualwp)wpno(O20004)