TM 5-3820-276-10-1
0029
TRAILER HITCH INSTALLATION - Continued
3.
With aid of assistant, push sandline winch control lever (Figure 10, Item 1) forward and raise trailer hitch
(Figure 10, Item 5).
4.
With aid of assistant, align trailer hitch (Figure 10, Item 5) to WWDR frame (Figure 10, Item 2).
5.
With aid of assistant, install four bolts (Figure 10, Item 4) and nuts (Figure 10, Item 3) to trailer hitch
(Figure 10, Item 5) and WWDR frame (Figure 10, Item 2).
6.
With aid of assistant, pull sandline winch control lever (Figure 10, Item 1) back and lower sandline cable and
hook (Figure 10, Item 6).
7.
With aid of assistant, remove sandline cable and hook (Figure 10, Item 6) from trailer hitch
(Figure 10, Item 5).
WARNING
Inner and outer table bushings can fall when table is in the open position. Ensure hands,
fingers, and feet are clear of bushings when opening table. Failure to comply may result in
injury or death to personnel. Seek medical attention in the event of an injury.
8.
Install outer table bushing (Figure 11, Item 6) to outer table (Figure 11, Item 4).
2
3
4
1
5
6
WWDS00233
Figure 11. Drilling Table.
9.
Install inner table bushing (Figure 11, Item 3) to inner table (Figure 11, Item 2).
02/13/2013root(opusualwp)wpno(O10014)
