TM 10-5430-245-13&P
0017 00
CAUTION
When assembling the drum, it is very important to align chalk marks
to prevent twisting cable assemblies. Failure to comply may cause
damage to drum.
14. Repeat INSTALLATION steps 1 through 13 to assemble the opposite end of the drum, then proceed to step 15.
Make sure that cable assemblies are not twisted when assembling opposite end of drum.
15. Install both adapter assemblies (WP 0016).
16. Install both coupler valves (WP 0012).
TEST
1. Fill drum with drinking water in accordance with WP 0005.
2. Perform PMCS (WP 0011, Table 1). Check drum for leaks.
END OF WORK PACKAGE
0017 00-10
