TM 10-4930-236-13&P
4-10. DISPENSING NOZLE MAINTENANCE
This task consists of:
a.
Removal
b.
Disassemby
c.
Repair
d.
Assembly
e.
Installation
INITIAL SETUP
Tools Required
General Mechanic Tool Kit (Appendix B, Section III, Item 3)
Pipe Wrench (Appendix B, Section III, Item 2)
Materials/Parts Required
Drycleaning Solvent (Appendix E, Section II. Item 1)
Silicone Compound (Appendix E, Section II, Item 5)
Sealing Compound (Appendix E, Section II, Item 6)
Rags, Wiping (Appendix E, Section II, Item 13)
Suitable Container
O-Ring Packing (1) (Appendix F)
Gasket (1) (Appendix F)
Equipment Condition
Pumping Unit Shutdown
General Safety Instructions
WARNING
Drycleaning solvent is potentially dangerous to personnel and property.
Using compressed air can be dangerous.
Silicone compound is toxic to skin, eyes and respiratory tract.
REMOVAL
a.
Position a suitable container beneath nozzle (1), remove cap (2) and operate nozzle lever (3) to drain
any fuel from nozzle.
b.
Pull out on cam lock arms (4) of coupling half (5) and disconnect nozzle (1) from reel hose (6).
4-19
