TM 10-4930-236-13&P
ASSEMBLY
a.
Cover and Fill Tube.
(1) Position brackets (31) on the cover (40), and install flat washers (30), capscrews (29) and locknuts
(28).
(2) Position cam (34) on the cover (40), and install hinge pin (33) and washer nuts (32).
(3) Install ell bolts (39), hook clamps (38), lockwashers (37), wing nuts (36) and cotter pins (35).
NOTE
Make certain the fill tube is in same position as noted at removal.
(4) Position the fill tube (27) on brackets (31), and install flat washers (26), capscrews (25), flat
washers (24) and nuts (23).
4-58
