TM 10-4930-236-13&P
b.
Cover and Fill Tube.
(1) Remove locknuts (23), flat washers (24), capscrews (25), flat washers (26) and fill tube (27).
'
(2) Remove locknuts (28), capscrews (29), flat washers (30) and brackets (31).
(3) Remove washer nuts (32), hinge pin (33) and cam (34).
(4) Remove cotter pins (35), wing nuts (36), lockwashers (37), hook clamps (38) and en bolts (39) from
cover (40).
REPAIR
WARNING
Dry cleaning solvent, P-D-80, used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and
prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 100 degrees F-138
degrees F (38 degrees C-59 degrees C).
a.
Clean all metal parts with dry cleaning solvent and dry thoroughly.
b.
Inspect parts for damage and replace parts as required.
4-57
