TM 10-4630-207-13&P
0026 00
j.
Remove generator (figure 22, item 2).
k.
Install new generator (figure 22, item 2).
l.
Fasten generator in place loosely with generator mounting bolts (figure 22, item 4) (figure 23,
item 2).
m. Install fan belt (figure 23, item 1) on the generator (figure 22, item 2) fan and engine pulleys.
n. Pivot generator away from water pump, tightening the generator adjusting bolt (figure 22, item 1).
o. Tighten generator mounting bolts (figure 22, item 4) (figure 23, item 2) from 3.5-4.7 kg-m (25.3-
34.0 ft-lbs).
p. Tighten adjust plate mounting bolt (figure 22, item 3) from 1.9-2.9 kg-m (13.7-21 ft-lbs).
q. Connect generator wiring and remove tags (figure 24, item 1).
r.
Check the drive belt tension between the fan pulley (figure 25, item 1) and the generator pulley
s.
Install fan shroud (figure 21, item 1).
t.
Fasten fan shroud in place with mounting bolts (figure 21, item 2).
u. Reconnect battery cable to negative terminal post.
2
1
Figure 21. Fan Shroud
0026 00-14
