TM 10-4630-207-13&P
0026 00
1
1
2
Figure 18. Fan Belt
Figure 19. Fan belt tension
3. Exhaust
WARNING
Allow the engine to cool for approximately 30 minutes before removing
exhaust silencer. The engine is hot and presents a burn hazard. Coming in
contact with hot exhaust parts may cause burns.
a. Loosen and remove outer shroud (figure 20, item 1) mounting bolts (figure 20, item 2) (qty 2).
b. Remove outer shroud (figure 20, item 1).
c.
Loosen and remove inner shroud (figure 20, item 3) mounting bolts (figure 20, item 4) (qty 4).
d. Remove inner shroud (figure 20, item 3).
e. Loosen and remove silencer mounting nuts (figure 20, item 5) (qty 3).
f.
Remove silencer (figure 20, item 6) from exhaust elbow (figure 20, item 7).
g. Remove gasket (figure 20, item 8) and discard in an approved container.
h. Clean mating surfaces of exhaust pipe elbow (figure 20, item 7).
i.
Install new gasket (figure 20, item 8).
j.
Install silencer (figure 20, item 6) on exhaust elbow (figure 20, item 7).
k.
Fasten silencer to elbow with mounting nuts (figure 20, item 5) (qty 3).
l.
Install inner shroud (figure 20, item 3) on silencer.
m. Fasten inner shroud in place with mounting bolts (figure 20, item 4) (qty 4).
0026 00-12
