TM 10-4630-207-13&P
0017 00
Table 3. No vacuum/pressure building in tank.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. No vacuum/pressure building
Step 1. Perform Procedure 2 as
in tank.
described in WP 0008 00.
Step 2. Check vacuum pump
Adjust vacuum pump drive belt
drive belt (1) for proper
as described in WP 0029 00.
adjustment (1/4-inch at center)
If condition persists, notify direct
support maintenance.
1
-inch
0017 00-4
