b .
Remove seal trim (4) from left
p l a t e ( 3 ).
c .
Remove left upper cover plate
enclosure (5).
2.12.10.2 Inspection.
a.
Inspect left upper cover plate
TM 10-4320-344-24
upper cover plate (2) and right upper cover
2) and right upper cover plate (3) from
(2) and right upper cover plate (3) for
deterioration or damage of insulation material on inner surface, corrosion,
bends, or cracks.
b .
Inspect seal trim (4) for cracks or deterioration.
2.12.10.3 Repair.
a.
Replace damaged or deteriorated insulation material on inner surface of left
upper cover plate (2) and right upper cover plate (3).
Refer to Appendix D to
manufacture new insulation material.
b.
Replace upper cover plates (2 or 3) if corroded or damaged to the extent that
they can not be properly mounted or secured.
c .
Replace damaged seal trim (4).
2.12.10.4 Installation.
a .
Position right upper cover plate (3) and left upper cover plate (2) on
enclosure (5).
b .
Install seal trim (4) on right upper cover plate (3) and left upper cover
p l a t e ( 2 ).
c .
Install screws (1).
2 - 6 7