TM  10-4320-344-24 2.12.8 Left Side Panel Assembly Maintenance, Model 609-C. This   task   covers: 2   .12.8.1   Removal 2 . 12 . 8 . 3    R e p a ir 2 . 12 . 8 . 2    I n s p e c t i o n 2 . 12 . 8 . 4    I n s t a l l a t i o n INITIAL  SETUP Tools Equipment   Conditions   (Continued) General   Mechanic’s   Automotive Top   Panel   Assembly   removed, Tool   Kit,   Appendix   B,   Section paragraph  2.12.4. III,   Item   1 Electrical   Receptacle   Connector   removed, Personnel paragraph    2.15.7. Two   people   are   required   to   lift Auxiliary   Fuel   Supply   and   Fuel   Return   Lines the   left   side   panel   assembly. removed   from   left   side   panel   assembly, paragraph    2.21.2. Equipment    Conditions Filler   Neck   Assembly   removed,   paragraph Pumping   station   shut   down,   T M 2 . 2 2 . 1. 10-4320-344-10. General   Safety   Instructions Access   Cover   Assembly   removed, paragraph   2.12.2. To   prevent   rolling   or   sliding,   do   not   work on   equipment   that   is   not   securely Air   Cleaner   and   Left   Side   Engine s t a b i l i z e d. Access  Door  Assemblies  removed, paragraph   2.12.3. Do   not   work   on   equipment   without   following standard   shop   safety   precautions. 2.12.8.1  Removal. Some   left   side   panel   assembly   mounting   screws   are   secured   with   nuts. Mark location   of   screw   and   nut   combinations   to   facilitate   reinstallation. a . Remove  screws  (Figure  2-19, 1)  and  nuts  (2)  from  left  side  panel  assembly  (3). Mark   location   of   nut   and . Two   people   are   required   to assembly. Failure   to   obey damage   to   the   equipment. screw   combination. lift   the   left   side   panel   assembly   from   the   pumping this   warning   may   result   in   personal   injury   or b . Remove   left   side   panel   assembly   (3)   from   pumping   assembly   (4). c . Remove  screws  (5)  securing  side  screen  assembly  (6)  to  left  side  panel assembly   (3). 2.12.8.2    Inspection. Inspect   left   side   panel   assembly   (3)   for   deterioration   or   damage of   insulation   material   on   inner   surface,   corrosion,   bends,   or   cracks. 2.12.8.3  Repair. a . Replace   damaged   or   deteriorated   insulation   material   on   inner   surface   of   left side   panel   assembly   (3). Refer   to   Appendix   D   to   manufacture   new   insulation material. 2-62