TM 10-4320-344-24
2.12.7 Control Panel Housing Assembly Maintenance, Model 609-C.
This task covers:
2.12.7.1 Removal
2 .
12 . 7 . 2 I n s t a l l a t i on
INITIAL SETUP
Tools
Equipment Conditions (Continued)
General Mechanics Automotive
Manual Throttle Control Cable removed,
Tool Kit, Appendix B, Section
III, Item 1
paragraph 2.16.26.
Auto Defeat Cable removed, paragraph
Equipment Conditions
2.16.28.
Pumping station shut down, T M
10-4320-344-10.
Cold Start Aid Cable removed, paragraph
2.16.29.
Top Panel Assembly removed,
General Safety Instructions
paragraph 2.12.4.
To prevent rolling or sliding, do not work
Control Panel Assembly removed,
on equipment that is not securely
paragraph 2.15.3.
s t a b i l i z e d.
Do not work on equipment without following
standard shop safety precautions.
2.12.7.1 Removal.
Some control panel housing assembly mounting bolts are secured with nuts.
Mark location of bolt and nut combinations to facilitate reinstallation.
a .
Remove bolts (Figure 2-18,
1) and nuts (2) from control panel housing assembly
( 3 ).
Mark location of screw and nut combinations.
Figure 2-18.
Control Panel
b .
Remove control panel housing assembly (3)
Housing Assembly.
from pumping assembly (4).
2 - 6 0