TM 10-4320-344-24
2.12.13 Baffle Maintenance. Model 609-C.
This task covers:
2.12.13.1 Removal
2.12.13.3
Repair
2.12.13.2 Inspection
2.12.13.4 Installation
INITIAL SETUP
Tools
Equipment Conditions (Continued)
General Mechanics Automotive
End Panel Assembly removed, paragraph
Tool Kit, Appendix B, Section
2.12.11.
I I I, Item 1
General Safety Instructions
Equipment Conditions
To prevent rolling or sliding, do not work
Pumping station shut down, TM
on equipment that is not securely
10-4320-344-10.
s t a b i l i z e d.
Top Panel Assembly removed,
Do not work on equipment without following
paragraph 2.12.4.
standard shop safety precautions.
2.12.13.1 Removal.
a .
Remove ten nuts (Figure 2-24,
1), bolts (2), and right side baffle (3) from
bulkhead panel assembly (4).
b .
Remove five nuts (5), bolts (6), and left side baffle (7) from bulkhead panel
assembly (4).
2.12.13.2 Inspection.
a.
Inspect baffles (3 and 7) for deterioration or damage to insulation material,
corrosion, bends, or cracks.
2.12.13.3 Repair.
a.
Replace damaged or deteriorated insulation material on baffles (3 and 7).
Refer to Appendix D to manufacture new insulation material.
b.
Replace baffles (3 or 7) if corroded or damaged to the extent that they can
not be properly mounted or secured.
2.12.13.4 Installation.
a .
Position left side baffle (7) against bulkhead panel assembly (4) and secure
with five bolts (6) and nuts (5).
b .
Position right side baffle (3) against bulkhead panel assembly (4) and secure
with ten bolts (2) and nuts (1).
2-71
