TM 10-4320-344-24
4.4.8.2 Repair.
a .
b .
c .
d.
Do not use cleaning solvent without proper ventilation and clothing.
Do not smoke or use near open flame or excessive heat.
Dry cleaning
solvent is potentially dangerous to personnel and property.
Clean
parts in a well-ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber gloves to protect eyes and skin.
Wash
exposed skin thoroughly.
Failure to obey this warning may result in
personal injury or death.
To prevent the possibility of embedding foreign objects in the eyes,
safety glasses must be worn when using compressed air.
Clean all components with cleaning solvent and thoroughly dry all components
with compressed dry air.
Measure diameter of bearing journal (3).
If diameter is not within 1.5738-
1.5744 inches (39.975-39.991 mm) replace bearing journal (3).
Inspect all other components for damage.
Replace damaged or defective items.
4.4.8.3 Installation.
a .
Install new sleeve bushing (4), bearing journal (3), and new sleeve bushing
(2) on crankcase (5).
Ensure timing marks on gears coincide when installing idler gear.
Failure to
obey this warning may result in damage to equipment.
b .
I n s t a l l i d l e r g e a r ( 1 ).
Ensure oil hole of new sleeve bushing (2) and bearing
journal (3) are aligned when installing idler gear (1).
4-29
