Figure 4-8.
Gear Housing Cover Maintenance, Model 609-A.
•
Do not use cleaning solvent without proper ventilation and clothing.
Do not smoke or use near open flame or excessive heat.
Dry cleaning
solvent is potentially dangerous to personnel and property.
Clean
parts in a well-ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber gloves to protect eyes and skin.
Wash
exposed skin thoroughly.
Failure to obey this warning may result in
personal injury or death.
•
To prevent the possibility of embedding foreign objects in the eyes,
safety glasses must be worn when using compressed air.
b .
Clean gear housing cover (5) and attaching components with cleaning solvent.
Dry thoroughly with compressed air.
c .
Inspect all components and mounting hardware for damage.
d.
Replace all damaged components.
4.4.4.3 Installation.
When installing new oil seal, use a small amount of sealing compound in gear
housing cover before pressing in seal.
If new seal is pre-coated, sealing
compound is not required.
a .
Install new oil seal (11) in gear housing cover (5).
4-19
TM 10-4320-344-24
