TM 10-4320-344-244.4.4 Gear Housing Cover Maintenance, Model 609-A.This task covers:4.4.4.1 Removal4 .4 . 4 . 3 I n s t a l l a t i o n4 .4 . 4 . 2 R e p a irINITIALSETUPToolsGeneral Mechanic’s AutomotiveTool Kit, Appendix B, SectionIII, Item 1Goggles, Industrial, Appendix B,Section III, Item 2Gun, Air Blow, Appendix B, SectionIII, Item 2Puller Kit, Appendix B, Section III,Item 2Torque Wrench, Appendix B, SectionIII, Item 2Material/PartsAdhesive (Gasket Cement), Appendix C,Item 1Abrasive Cloth (Emery), Appendix C,Item 8Gloves, Appendix C, Item 11Sealing Compound, Appendix C, Item 23Oil Soap, Appendix C, Item 24Solvent, Dry Cleaning, Appendix C,Item 26Material/Parts (Continued)Gaskets (TM 10-4320-344-24P)Lock Washers (TM 10-4320-344-24P)Oil Seal (TM 10-4320-344-24P)Equipment ConditionsRadiator Support Brackets removed,paragraph 2.20.5.Alternator Belt removed, paragraph2.21.13.Oil Cooler removed, paragraph 2.21.28.Crankshaft Pulley and Vibration Damperremoved, paragraph 3.8.21.General Safety InstructionsDo not work on equipment that is notsecurely stabilized to prevent rollingo r s l i d i n g .Do not work on equipment without follow-ing standard shop safety practices.4.4.4.1 Removal.a .Remove gear housing attaching nut (Figure 4-8, 1) and lock washer (2).Discard lock washer (2).b.Remove thirteen cover attaching screws (3), lock washers (4), gear housingc o v e r ( 5 ), and gasket (6).Discard lock washers (4) and gasket (6).c .Remove four screws (7), lock washers (8), thrust plate (9), and gasket (10)from gear housing cover (5).Discard lock washers (8) and gasket (10).d.Press oil seal (11) from gear housing cover (5).Discard oil seal (11).4.4.4.2 Repair.a.Wipe clean all gasket mounting surfaces.4-18
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
