TM 10-4320-344-24
3.8.13 Suction Pipe Replacement, Models 609-C and US636HCCD-1.
This task covers:
3.8.13.1 Removal
3 .
8 .1 3 . 3 I n s t a l l a t i on
3 .
8 .1 3 . 2 R e p a i r
INITIAL SETUP
Tools
Equipment Conditions
General Mechanic's Automotive
Oil pan removed, paragraph 3.8.12.
Tool Kit, Appendix B, Section
III, Item 1
General Safety Instructions
Material/Parts
D O not work on equipment without
following standard shop safety practices.
Rags, Appendix C, Item 20
Lock Washers (TM 10-4320-344-24P)
3.8.13.1 Removal.
Figure 3-31.
Suction Pipe Replacement, Models 609-C and US636HCCD-1.
a.
b .
c .
Remove two nuts (Figure 3-32, 1), lock washers (2), and retaining bolts (3)
from retaining bracket (4).
Discard lock washers (2).
Loosen nut (5) and remove tube assembly (6) from retaining bracket (4) and oil
pump assembly (7).
Remove two mounting bolts (8), flat washers (9), and retaining bracket (4).
3-75
