3.8.12 0i1 Pan Assembly Maintenance. (Continued)
c .
Inspect all components and mounting hardware for damage.
d.
Weld oil pan in accordance with TM 9-237 or replace as required.
e .
Replace all other defective components.
When installing new gaskets on Model 609-A use sealing compound.
Progressively torque bolts on Model 609-A to 20 ft-lbs (27 N•m).
3.8.12.3 Installation.
a.
Lightly grease two new gaskets (7).
b .
Position intermediate plate (8), new gaskets (7), and oil pan (6) against
engine and secure with one spacer (5), one new lock washer (4), and long screw
(3) in location noted or marked in 3.8.12.1 step a, and 26 flat washers (2)
and short screws (1).
3-74
TM 10-4320-344-24
NOTE
