TM 10-4320-344-24
3.8.4 Engine Mount Isolators Replacement, Model 609-C.
This task covers:
3 .8 . 4 . 1 R e m o v al
3 .8 . 4 . 2 I n s t a l l a t i on
INITIAL SETUP
Tools
Equipment Conditions (Continued)
General Mechanic’s Automotive
Tool Kit, Appendix B, Section
Engine removed, paragraph 3.8.1.
III, Item 1
General Safety Instructions
Materials/Parts
Do not work on equipment that is not
securely stabilized to prevent rolling
Lock Washers (TM 10-4320-344-24P)
o r s l i d i n g.
Equipment Conditions
Do not work on equipment without follow-
ing standard shop safety practices.
Pumping Station shutdown, TM 10-4320-
344-10.
3.8.4.1 Removal. Remove eight nuts (Figure 3-18, 1), lock washers (2), cap screws
(3), and four engine mount isolators (4) from trailer (5).
Figure 3-18.
Engine Mount Isolators, Model 609-c.
3.8.4.2 Installation. Position four engine mount isolators (4) on trailer (5) and
secure with eight cap screws (3), new lock washers (2), and nuts (1).
3-44
