TM 10-4320-344-243.8.1 EngineReplacement.(Continued)3.8.1.2 Installation.a.Attach lifting sling and hoist to lifting eyes on top of engine assembly (1).Do not stand or put arms, legs, or any other part of the body under hoistedload.Failure to observe this warning could result in personal injury ordeath.b.c .d.e .f .Three personnel are required to remove engine.Failure to observe thiscaution may result in damage to engine.Hoist engine assembly (1) and position slightly above engine support (8) andt r a i l e r ( 7 ).Align pump drive coupling with engine flywheel and carefully slide engineassembly (1) towards pump assembly to engage pump drive coupling with engineflywheel.Lower hoist.Install two new lock washers (6) and bolts (5).Install two mounting bolts (4), new lock washers (3), and nuts (2).Remove lifting eyes from Models 609-C and US636HCCD-1.Remove lifting sling and hoist from lifting eyes on top of engineassembly (1).Ensure engine assembly is securely mounted to trailer before starting engine.g .Refer to TM 10-4320-344-10 and start engine, check for fuel leaks, and stopengine.3-40
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business