TM 10-4320-344-24
2.23.6 Master Cylinder and Brake Line Maintenance. (Continued)
2.23.6.2 Repair.
a.
Inspect all components and mounting hardware for damage.
b .
Refer to appendix D to repair damaged or defective metal brake lines (2, 15,
and 20).
c .
Replace all defective components.
2.23.6.3 Assembly.
a .
b .
c .
d.
e .
f .
Connect metal brake line (20) to backing plate (16) on left side wheel and
tire assembly and tee fitting (13).
Position two brake line clamps (19) on metal brake line (20) and secure with
two screws (18).
Repeat step a to connect metal brake line (15) to backing plate (16) on right
side wheel and tire assembly (17).
Connect rubber brake line (10) to tee fitting (13).
Insert rubber brake line (10) in mounting bracket (12) and secure with
r e t a i n i n g c l i p ( 1 1 ).
Connect metal brake line (2) to rubber brake line (10) and secure to trailer
frame with four brake line mounting clamps (9) and screws (8).
Ensure brake actuator pushrod properly engages master cylinder when master
c y l i n d e r i s i n s t a l l e d i n t r a i l e r.
g.
Insert master cylinder (1) in trailer (7) and secure with wiring harness clamp
(6), four spacers (5), two bolts (4) and two nuts (3).
h.
Connect metal brake line (2) to master cylinder (1).
i .
Refer to paragraph 2.23.5, bleed brake system and check for leaks.
2-390
NOTE
