TM 10-4320-344-24
2.21.20 Engine Switch and Transmitter Replacement, Model 609-C.
This task covers:
2.21.20.1 Removal
2.21.20.2 Installation
INITIAL SETUP
Tools
Equipment Conditions (Continued)
General Mechanic’s Automotive
Battery disconnected, paragraph 2.15.3.
Tool Kit, Appendix B, Section
III, Item 1
General Safety Instructions
Materials/Parts
Do not work on equipment that is not
securely stabilized to prevent rolling
Tags, Appendix C, Item 31
o r s l i d i n g.
Equipment Conditions
Do not work on equipment with battery
connected.
Electrocution hazard is pre-
Pumping station shut down, TM 10-
sent if battery is connected.
4320-344-10.
Do not work on equipment without follow-
Cowling removed, TM 10-4320-344-10.
ing standard shop safety practices.
This procedure applies to the engine temperature switch.
The procedures for the
oil pressure switch, engine temperature transmitter, and oil temperature
transmitter are similar.
2.21.20.1 Removal.
Figure 2-135.
Engine Switch and Transmitter Replacement, Model 609-C.
2-308
NOTE
