2.21.19 V-Belt Contact Switch Maintenance. Models 609-C and US636HCCD-l.
(Continued)
2.21.19.2 Removal.
Figure 2-134.
V-Belt Contact Switch Maintenance.
a .
Disconnect connector (1) from V-belt contact switch (2).
b.
Remove nut (4) and V-belt contact switch (2) from retainer bracket (5).
c .
Remove loop clamp (6).
Discard loop clamp (6).
d.
Disconnect connector (7) and remove wiring harness (8).
e .
Remove screw (9) and retainer bracket (5).
2.21.19.3 Repair.
a.
Inspect retainer bracket (5), wiring harness (8), and all mounting hardware
for damage.
b .
Replace all defective components.
2.21.19.4 Installation.
a .
Position retainer bracket (5) against engine and secure with screw (9).
b.
Connect wiring harness (8) to engine wiring harness with connector (7).
2-306
TM 10-4320-344-24
