TM 10-4320-344-24To prevent burns or other injury, allow exhaust pipe elbow assembly to coolbefore removal.Failure to obey this warning may result in serious personali n j u r y.a .Remove two screws (Figure 2-136, 1), lock washers (2), spacers (3), andmanifold nuts (4).Discard lock washers (2).b .Remove two screws (5), flat washers (6), and exhaust pipe support (7).c .Remove four nuts (8),lock washers (9), bolts (10), exhaust pipe elbow (11),gasket (12), and companion flange (13).Discard lock washers (9) andgasket (12).d .Remove two bolts (14), lock washers (15), and flat washers (16) and exhaustpipe mounting plate (17).Discard lock washers (15).2.21.21.2 Repair.a.Inspect all components and mounting hardware for damage.b.Replace all defective components.2.21.21.3 Assembly.a.Position exhaust pipe mounting plate (17) on turbocharger adapter flange (18)and secure with two flat washers (16), new lock washers (15), and bolts (14).b.Install companion flange (13), new gasket (12), exhaust pipe (11) and securewith four bolts (10), new lock washers (9), and nuts (8).c .Position exhaust pipe support (7) against exhaust pipe elbow (11) and securewith two flat washers (6) and screws (5).d .Secure lower portion of exhaust pipe support (7) with two manifold nuts (4),spacers (3), new lock washers (2), and screws (1).2-311
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
