2.4.4 Processing Unpacked Equipment

Figure 2-1. Pumping Assembly with Protective Plywood Cap.

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
15

e . Inspect pump suction, discharge pressure and vent line fittings, and connections for condition and security. f . Inspect engine for loose nuts, bolts, and screws. g . Inspect all controls and instruments for damage and loose mountings. h. Inspect all fluid lines and hoses for dents, loose connections, and cuts. i . Inspect all air cowlings for cracks, security, and deformations. j . Inspect engine and pump mounts for security. k. Inspect tires for cuts, bulges, cracks, and deterioration. Ensure that lug nuts are tight. l . Remove all foreign matter from assembly. m. Wipe pumping assembly clean. 2.4.4 Processing Unpacked Equipment. a . Remove all tape and packing film from the 600 GPM Pumping Assembly. b . Remove all plastic tie-wraps necessary to place equipment in operation. c . Remove all shipping tags from components. Retain tags for future reference. d. Refer to DA Form 2258, Depreservation Guide for Vehicles and Equipment, packed with the equipment. The depreservation guide explains what was done to the equipment prior to packaging. It also explains what has to be done before placing the equipment in operation. Perform all depreservation actions required by the depreservation guide. 2.4.5 Assembly of 600 GPM Pumping Assembly. Instructions for assembling the 600 GPM water pumping assemblies are provided below. 2.4.5.1 Tools, Test Equipment, and Materials Required for Installation. A general mechanic’s tool kit is required for installation of the equipment. 2.4.5.2 Assembly of Model 609-A. 2.4.5.2.1 Air Cleaner Installation. The air cleaner assembly will have been removed before the protective plywood cap was installed. It will have been taped or strapped to the trailer chassis, alongside the battery cables. Retrieve the air cleaner assembly. Install the air cleaner assembly in accordance with paragraph 2 . 1 4 . 1. 2.4.5.2.2 Muffler Installation. The muffler will have been removed before the p r o t e c t i v e p l y w o o d c a p w a s i n s t a l l e d . I t w i l l h a v e t a p e d o r s t r a p p e d t o t he side of the engine. Retrieve the muffler. Install the muffler in accordance with paragraph 2.13.1. 2.4.5.3 Assembly of Model 609-C. Model 609-C does not require assembly to prepare it for use. 2.4.5.4 Assembly of Model US636HCCD-1. 2.4.5.4.1 Air Cleaner Installation. The air cleaner assembly will have been removed and partially disassembled before the protective plywood cap was installed. It will have been taped or strapped to top of the battery box. Retrieve the air cleaner assembly. Also, the air intake pipe should have been retrieved when the muffler was retrieved. Install the air cleaner assembly in accordance with paragraph 2.14.3. 2.4.5.4.2 Muffler Installation. The muffler will have been removed and partially disassembled before the protective plywood cap was installed. It will have been 2-4 TM 10-4320-344-24

Privacy Statement
Press Release
Contact