TM 10-4320-318-14
Table 2-1. Controls and Indicators
Control or Indicator
Function
1. Speed Control Lever
2. Air Flow Indicator
3. Decompression Lever
4. Dipstick
5. Extra Fuel Button
Used to control engine speed. The position START of the
control lever is used when starting the engine. At this
position, the engines operates at idle speed. The position
RUN of the control lever gives the highest operating
speed. By moving the control lever between START and
RUN the speed required can be obtained. At the position
STOP, the engine will shut down.
Indicates air filter restriction. Air filter needs servicing
when indicator indicates red signal.
Used to reduce compression in cylinder when starting
engine.
Used to check oil level with engine shut down or in
operation. Dipstick has an add line and a full line. Add oil
when engine oil level falls to or below the add line. Do not
fill above full line.
Used to add extra fuel when starting engine. The button
is pulled for starting. After engine start, extra fuel button
goes back by itself.
2-2
