Section III. TECHNICAL PRINCIPLES OF OPERATION

1-13. Location and Description of Major Components

TM-10-4320-318-14 Centrifugal Pump Unit Water 125 (NSN 4320-01-156-3873) Model No. 2x2 SP/52109 EIC: ZHT Manual
Page Navigation
5

TM 10-4320-318-14 1-14. Equipment Data. Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2X2 SP/52109 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 lb(172.5 kg) Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 in. (78.7cm) Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 in. (68.6 cm) Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 in. (94.0 cm) Fuel tank capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 gallon (3.79 I) Fuel consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.39 gallon per hour (2.5 hours per gallon) Diesel Engine: Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 HP at 3600 rpm Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single cylinder; four-stroke; air-cooled Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E673 Pump: Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Self-priming, centrifugal, direct coupled to diesel engine Output volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 gpm at 50 ft tdh Designed working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 psi (1489kPa) Suction and discharge size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. ... . . . . . . .2 in. (15 cm) Section III. TECHNICAL PRINCIPLES OF OPERATION 1-15. Functional Description of Pump Unit. The pump unit (Figure 1-2) is a frame mounted 125 GPM pumping assembly. It consists of a 4-stroke, single-cylinder, air-cooled diesel engine and a direct coupled self-priming centrifugal pump. A 1-gallon (3.785 I) fuel tank is an integral part of the pump unit. Engine starting is by a safety starting handle and compression release. 1-16. Principles of Operation. The operation of the centrifugal pump depends on centrifugal force to move water through the pump and to maintain the desired pressure. The functional description of controls and indicators of the pump unit are described in Section I of Chapter 2. 1-5/(1-6 blank)

Privacy Statement
Press Release
Contact