TM 10-4320-315-24
2-45. MAINTENANCE OF TURBOCHARGER OIL INLET TUBE ASSEMBLY - (Cont)
(4)
Remove banjo bolts (14) and seal washers (15).
(5)
Remove mounting bolts (16) and washers (17) from flanged end of oil inlet tube (18) at turbocharger (21).
(6)
Remove oil inlet tube (18) and gasket (19).
b.
INSTALL.
(1)
Position gasket (19) on mounting flange of turbocharger (20).
(2)
Install oil inlet tube (18) on turbocharger (21). Make sure gasket is correctly aligned with flanged end of tube
(18) for proper seal.
(3)
Install washers (17) and mounting bolts (16) on flanged end of tube (18).
(4)
Position oil inlet tube (18) on oil filter base (21).
(5)
Secure with seal washers (15) and banjo bolts (14).
(6)
Install oil pressure switch (13) and connect wire (12). Remove tag.
(7)
Install spacer (5), plate (4), clamp (3), flat washer (2) and screw (1) and secure oil inlet tube (18) at flywheel
end of engine.
(8)
Install spacer (11), plate (10), clamp (9), flat washer (8), lockwasher (7), and screw (6) and secure oil
inlet tube (18) at remaining two clamping positions.
2-85