TM 10-4320-315-24
2-43. MAINTENANCE OF FUEL FILTER ASSEMBLY - (Cont)
(b)
Remove drain valves (1).
(c)
Unscrew fuel filters (2).
(2)
Remove filter base (3) as follows:
(a)
Disconnect fuel hoses (4) by removing banjo bolts (5) and seal washers (6).
(b)
Remove bolts (7) and washers (8) and filter base (3).
(c)
Clean base mounting area.
b.
INSTALL.
(1)
Install filter base (3) as follows:
(a)
Position filter base (3) on engine block. Secure with washers (8) and bolts (7).
(b)
Connect fuel hoses (4) with seal washers (6) and banjo bolts (5).
(2)
Install fuel filters (2) as follows:
(a)
Install filter elements (2) onto filter base (3).
(b)
Install drain valves (1) onto fuel filters (2).
2-81
