TM 10-4320-315-24
2-45. MAINTENANCE OF TURBOCHARGER OIL INLET TUBE ASSEMBLY
This task covers:
a.
Remove
b.
Install
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Tool Kit
Pumping assembly is shutdown (refer to TM 10-4320-
(Item 1, Appendix B)
315-10).
Battery assembly is disconnected (para. 2-16).
Materials/Parts
Tags (Item 21, Appendix C)
Gasket (TM 10-4320-315-24P)
Lockwasher (TM 10-4320-315-24P)
a. REMOVE, (Figure 2-32)
(1)
Remove screw (1), flat washer (2), clamp (3), plate (4) and spacer (5) at flywheel end of engine.
(2)
Remove screw (6), lockwasher (7), flat washer (8), clamp (9), plate (10) and spacer (11) at remaining two
clamping positions.
(3)
Tag and disconnect wire (12) and remove oil pressure switch (13).
Figure 2-32. Oil Inlet Tube Assembly
2-84
