TM10-4320-315-24
2-34. MAINTENANCE OF AIR FILTER GAGE AND HOSE
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Pumping assembly is shutdown (refer to TM 10-4320-
(Item 1, Appendix B)
315-10).
a. REMOVE. (Figure 2-21)
(1)
Disconnect hose (1) at air cleaner outlet line (2).
(2)
Disconnect other end of hose (1) from air filter gage (3).
(3)
Loosen cable clamps and remove hose (1).
(4)
Remove screws (4) from top of air filter gage (5). Remove air filter gage (3).
b. INSTALL.
(1)
Install air filter gage (3) in cutout of panel. Secure with top part of air filter gage (5) and screws (4).
(2)
Connect hose (1) to air filter gage (5).
(3)
Install hose (1) in engine compartment and secure with cable clamps.
(4)
Install other end of hose (1) to air cleaner outlet line (2).
2-60
