TM 10-4320-315-24
2-33. MAINTENANCE OF COLD START AID HOSE, BOTTLE AND CABLE - (Cont)
(5)
Install bracket (20) with actuator (6) onto panel wall with bolts (19), flat washers (18), lockwashers (17), and
nuts (16).
(6)
Install wire end of cable (15) through clamp (14) and tighten clamp.
(7)
Connect wire end of cable (15) to actuator lever (13) with cable stop nut (12) and screw (11).
(8)
Connect hose fitting (8) of hose assembly (10) to engine air intake line (9).
(9)
Connect hose fitting (7) of hose assembly (10) to actuator (6).
(10)
Install ether bottle (5) into actuator (6). Secure ether bottle (5) with clamp (4). Tighten wingnut (3).
(11)
Close air cleaner and engine access doors (1 and 2).
2-59
