TM 10-4320-315-24
3-14. MAINTENANCE OF NOISE ENCLOSURE CONTROL PANEL
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Control panel assembly removed (para. 2-17).
(Item 1, Appendix B)
Roof removed (para. 3-7).
Manual throttle control cable removed (para. 2-32).
Materials/Parts
Auto defeat cable removed (para. 2-31).
Air filter gage removed (para. 2-34).
Lockwashers (TM 10-4320-315-24P)
Cold start cable removed (para. 2-33).
Rivets (TM 10-4320-315-24P)
a.
REMOVE. (Figure 3-9)
(1)
Remove bolts (1) and flat washers (2).
(2)
Remove bolts (3), flat washers (4), nuts (5), and flat washers (6).
(3)
Remove bolts (7), flat washers (8), and panel (9).
(4)
Remove rivets (10) (para. 3-6) and hinged panel (11).
(5)
Remove bolts (12), flat washers (13), nuts (14), lockwashers (15), and mounting bracket (16).
b.
INSTALL.
(1)
Install mounting bracket (16) with flat washers (13), bolts (12), lockwashers (15), and nuts (14).
(2)
Install hinged panel (11) on panel (9) with rivets (10) (para. 3-6).
(3)
Install panel (9) on mounting bracket (16) with flat washers (8), and bolts (7).
(4)
Secure panel (9) to interior brace with flat washers (4), bolts (3), flat washers (6), and nuts (5).
(5)
Install flat washers (2) and bolts (1).
3-23
