3-12. MAINTENANCE OF NOISE ENCLOSURE LEFT PANEL

Figure 3-6. Noise Enclosure Interior Panels

TM-10-4320-315-24 Pumping Assembly Water 600 GPM Trailer Mounted (NSN 4320-01-31448844) Manual
Page Navigation
152

TM 10-4320-315-24 3-12. MAINTENANCE OF NOISE ENCLOSURE LEFT PANEL This task covers: a. Remove b. Install INITIAL SETUP: Tools Equipment Conditions General Mechanics Tool Kit Roof removed (para. 3-7). (Item 1, Appendix B) Front panel removed (para. 3-10). Muffler removed (para. 3-16). Materials/Parts Lockwashers (TM 10-4320-315-24P) Rivets (TM 10-4320-315-24P) a. REMOVE. (Figure 3-7) (1) Remove nut (1), flat washers (2 and 3), and bolt (4) that secure chain (5) for exhaust panel assembly. (2) Remove rivets (6) (para. 3-6). (3) Remove engine access hinged panel (7). (4) Remove bolts (8), flat washers (9), and upper access panel (10). (5) Remove bolts (11) and flat washers (12). (6) Remove bolts (13), nuts (16), and flat washers (14 and 15). (7) Remove bolts (17), flat washers (18), and left panel (19). (8) Remove bolts (20), flat washers (21), nuts (22), lockwashers (23) and mounting bracket (24). b. INSTALL. (1) Install mounting bracket (24) with flat washers (21), bolts (20), lockwashers (23), and nuts (22). (2) Install left panel (19) with flat washers (12) and bolts (11). Install flat washers (18) and bolts (17). (3) Secure left panel (19) to interior brace (25) with flat washer (14), bolts (13), flat washers (15), and nuts (16). (4) Install upper access panel (10) with flat washers (9) and bolts (8). (5) Install engine access hinged panel (7) with rivets (6) (para. 3-6). (6) Secure chain (5) for exhaust panel assembly with flat washers (2 and 3), bolt (4), and nut (1). 3-19

Privacy Statement
Press Release
Contact