TM 10-4320-315-24
3-10. MAINTENANCE OF NOISE ENCLOSURE FRONT PANEL
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Roof removed (para. 3-7).
(Item 1, Appendix B)
Materials/Parts
Rivets (TM 10-4320-315-24P)
Lockwashers (TM 10-4320-315-24P)
a.REMOVE. (Figure 3-5)
(1)
Remove nut (1), flat washers (2 and 3), and bolt (4) that secures chain (5).
(2)
Remove rivets (6) (para. 3-6).
(3)
Remove hinged exhaust panel assembly (7).
(4)
Open air filter access door (8) and remove shelf (9) above air filter assembly.
(5)
Remove bolts (10) and flat washers (11).
(6)
Remove front panel (14).
(7) Removebolts (15), flat washers (16), nuts (17), and lockwashers (18).
(8)
Remove front panel mounting bracket (19).
(9)
Remove rivets (20) (para. 3-6) and support bracket (21).
b.
INSTALL.
(1)
Install support bracket (21) on front panel (14) with rivets (20) (para. 3-6).
(2)
Install front panel mounting bracket (19) with flat washers (16), bolts (15), lockwashers (18), and nuts (17).
(3)
Install front panel (7) and secure with flat washers (13) and bolts (12).
(4)
Install flat washers (11) and bolts (10).
(5)
Install exhaust panel assembly (2) and secure with rivets (6) (para. 3-6).
(6)
Secure chain (5) with flat washers (2 and 3), bolt (4), and nut (1).
(7)
Install shelf (9) above air filter through access panel door (8).
3-15
