TM 10-4320-315-24
3-9. MAINTENANCE OF NOISE ENCLOSURE RIGHT PANEL
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Roof removed (para. 3-7).
(Item 1, Appendix B)
Fuel valves and lines removed (para. 2-38).
Materials/Parts
Rivets (TM 10-4320-315-24P)
Lockwashers (TM 10-4320-315-24P)
a.
REMOVE. (Figure 3-4)
(1)
Remove bolts (1) and flat washers (2) at sides of right panel (9).
(2)
Remove bolts (3), flat washers (4), nuts (5), and flat washers (6).
(3)
Remove bolts (7), flat washers (8), and right panel (9).
(4)
Remove rivets (10) and engine access panel door (11) (para. 3-6).
(5)
Remove rivets (12) and air filter access panel door (13) (para. 3-6).
(6)
Remove bolts (14), flat washers (15), nuts (16), lockwasher (17), and right panel mounting bracket (18).
b.
INSTALL.
(1)
Install right panel mounting bracket (18).
(2)
Install flat washers (15), bolts (14), lockwashers (17), and nuts (16).
(3)
Install air filter access panel door (13) with rivets (12) (para. 3-6).
(4)
Install engine access panel door (11) with rivets (10) (para. 3-6).
(5)
Install right panel (5) in mounting bracket with flat washers (8) and bolts (7).
(6)
Install flat washers (4), bolts (3), flat washers (6), and nuts (5).
(7)
Install flat washers (2) and bolts (1) at sides of right panel (5).
3-13
