TM 10-4320-315-243-11. MAINTENANCE OF NOISE ENCLOSURE INTERIOR PANELSThis task covers: a.Removeb.InstallINITIAL SETUP:ToolsEquipmentConditionsGeneral Mechanics Tool KitCold start hose, bottle, and cable removed (para.(Item 1, Appendix B)2-33).Air intake pipe removed (para. 2-39).Materials/PartsRoof removed (para. 3-7).Front panel removed (para. 3-10).Lockwashers (TM 10-4320-315-24P)Exhaust pipes and muffler removed (para. 3-16).a.REMOVE. (Figure 3-6)(1)Remove rivets (1) (para. 3-6) and air duct sleeve (2). Remove gasket (3).(2)Remove rivets (4) and air duct (5) for engine blower.(3)Remove divider panel (6).(4)Remove panel (7).(5)Remove rivets (8) (para. 3-6).(6)Remove divider panel (9).(7)Remove nuts (10), lockwashers (11), and bolts (12) that secure air duct (13) to engine air discharge duct(14).(8)Remove rivets (15) (para. 3-6) and support bracket (16).b.INSTALL.(1)Install support bracket (16) on divider panel (9) with rivets (15) (para. 3-6).(2)Install air duct (13) to engine air discharge duct (14) with bolts (12), lockwashers (11), and nuts (10).(3)Install divider panel (9) in support brackets (17 and 18) and secure with rivets (8) (para. 3-6).(4)Install panel (7) in support bracket (19).(5)Install divider panel (6) in support bracket (16).(6)Install air duct (5) on divider panel (6) with rivets (4) (para. 3-6).(7)Install air duct sleeve (2) on air duct (5) with rivets (1) (para. 3-6).3-17
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business