TM 10-4320-315-24
3-16. MAINTENANCE OF EXHAUST PIPES AND MUFFLER
This task covers:
a.
Remove
b.
Install
INITIAL SETUP:
Tools
Equipment Conditions
General Mechanics Tool Kit
Roof of noise enclosure removed (para. 3-7).
(Item 1, Appendix B)
Materials/Parts
Gaskets (TM 10-4320-315-24P)
Lockwashers (TM 10-4320-315-24P)
a.
REMOVE. (Figure 3-11)
(1) Remove bolts (1), flat washers (2), and access plate (3).
(2)
Open hinged exhaust panel assembly (9).
(3)
Remove nut (4), flat washers (5 and 6), and bolt (7) that secures chain (8) of hinged exhaust panel
assembly (9).
(4)
Lower hinged exhaust panel assembly (9) to the full open position.
(5)
Remove bolts (10) and locknuts (11) that secure flange of flexible exhaust pipe (12) to turbocharger flange
(13).
(6)
Remove nut (14), lockwasher (15), and bolt (16) from each of the four muffler mounts (17).
(7)
Remove muffler (18).
(8)
Remove gasket (19).
(9)
Unscrew and remove flex exhaust pipe (12) from elbow (20).
(10)
Unscrew elbow (20) from muffler (18).
(11)
Remove bolts (21), nuts (22), flat washers (23) and clamps (24) from muffler (18).
b.
INSTALL.
(1)
Install clamps (24) on muffler (18) with flat washers (23), bolts (21), and nuts (22).
(2)
Install elbow (20) on threaded pipe of muffler (18).
(3)
Install threaded end of flexible exhaust pipe (12) on elbow (20).
(4)
Install gaskets (19) on flexible exhaust pipe (12).
3-26
