TM 10-4320-310-14
4-17. REPLACE FUEL FILTER, FUEL PRESSURE LINE, HOSES AND FITTINGS (Continued)
3
Check non-return valve by shaking for free movement of internal valve ball. If necessary, clean with dry cleaning
solvent. If internal valve ball does not have free movement, replace non-return valve.
INSTALLATION:
Death or serious Injury could occur if fuel Is not handled
carefully. Use In a well-ventilated area away from open
flame, arcing equipment, Ignition sources, heaters, or
excessive heat. Engine must be turned off and cool before
refueling. Always store fuel In properly marked containers.
DO NOT SMOKE.
1
Install fuel pressure line (1) on injection pump (3) and injector (2).
2
Install fuel hose (4) (double ring piece to injector) on
double ring piece (5).
3
Install fuel hose (6) (injection pump to double ring piece)
on double ring piece (7).
4-24
